Racing car engines can produce rotational speeds of up to 20,000 rpm. The special challenge in measuring these speeds is the extremely rapid changes in rotation of up to 100,000 rpm per second. It is therefore essential that the index gap in the gearwheel, used for recording purposes, comprises two missing teeth instead of one. A single missing tooth could be confused with a fast decrease in rotational speed.
The D107 module can detect the missing teeth at maximum speeds, and correct each measured value in real time. This contributes to stabilizing the measured speed values, and readings are not influenced by the index gap.
- 2 galvanic isolated input channels, each with3 differential or single-ended inputs.
- Configurable thresholds -20 V to +20 V,therefor usable with inductive sensors witch providingan amplitude that’s depends on the frequency.
- Input frequency range up to 1 MHz, thanks to theused Chronos method frequencies can be measureddown below 1 Hz without a gap.
Dedicated for frequency, PWM and time measurement and for counter signals quadrature counter with reference zero.
The new digital measurement module D107 is available in the known types: For the DIN-rail, as EtherCAT module in Q.brixx desktop case and in the 19 “variants 1U and 3U.
More articles
Test of Battery and Battery Management Systems
At a very early stage Gantner Instruments was involved with special products for testing of batteries in the E-Drive environment. An already existing and successful product range is now supplemented with a useful novelty.
Read more...Real-world High-Power EIS Measurements – Free Webinar
Gantner Instruments invites experts and decision-makers from manufacturing companies and asset management to our focused webinar on “Real-world High-Power EIS Measurements.”
Read more...Science Brunch – IPERMON
On the 8th of October the climate and energy fund invites Gantner Instruments Vice President Jürgen Sutterlüti to present the project IPERMON at the science brunch in Vienna.
Read more...Systèmes d’acquisition de données portables et mobiles
De nombreuses raisons justifient un système de mesure flexible et robuste qui doit être facile à transporter pour collecter des données de mesure à différents endroits. Il peut s'agir, par exemple, de mesures à court terme sur des machines ou des composants d'usine lors de la mise en service après un entretien, ou de mesures récurrentes sur des ponts ou d'autres ouvrages d'art.
Read more...