Austria | Germany | France | Sweden | India | USA | China | Singapore
Q.series X A142
Products & Services | 2 minutes Reading Time |

Q.series X A142

Universal I/O module with analog output for closed-loop control applications

You can acquire data and control your testing operations with Q.series X systems. With the introduction of our new Q.series X A142, we have extended our capabilities for force and motion control applications. The Q.series X A142 is a universal input and output module designed with closed-loop control applications in the field of automotive, aerospace, and mechanical testing in mind. It features all sensor interfaces typically found on a hydraulic, pneumatic, or electric test actuator. By combining with an onboard 10 VDC analog output and test.con’s PID controller functionality, you can turn your Q.series X system into an integrated data acquisition and control solution for any force or motion control application.

The A142 comes with three 18-Bit, 20 kHz analog inputs (SAR ADC). You can use two inputs for LVDT/RVDT sensors or strain gage-based transducers, allowing you to use dual-bridge load cells for critical force control applications. The third analog input is a 10 VDC voltage input that can be freely configured for, for example, a potentiometric sensor or an external function generator as input for the PID controller. An additional Synchronous Serial Interface (SSI) makes the A142 unique. SSI is a point-to-point serial communication standard for digital data transmission between a master and a slave. SSI is commonly used with absolute encoders, as well as with Temposonics position sensors from MTS Sensors.

What is SAR ADC?

The method of Successive Approximation Register (SAR) is a method used in A/D converters for converting the analog signal into a digital signal. It is based on the comparison of the analog input voltage with a reference voltage. In successive approximation, the comparison is made step by step and is repeated continuously, whereby the reference voltage is changed so that it increasingly approaches the input voltage. Unlike a sigma-delta ADC, the SAR architecture does not have latency. The relatively high sample rate and zero-latency make the SAR ADC suitable for closed-loop control applications.

Key Features:

  • 2 Analog inputs for strain gage transducers or LVDT/RVDT sensors
  • 1 Synchronous Serial Interface (SSI)
  • 1 10 VDC analog input
  • 1 10 VDC analog output
  • 4 Digital inputs and outputs
  • 20 kHz update rate
  • Low-latency 18-Bit SAR ADC
  • 500 VDC galvanic isolation for all analog inputs
  • Onboard virtual channels for scaling, filtering, and calculations
  • Available in Q.bloxx X, Q.brixx X or Q.raxx X packaging
  • Optionally as EtherCAT slave module (XE version)
  • 15 Pin standard D-sub connectors

Read more about our Q.series X Data Acquisition System here.

More articles

News

Crate.io presents Gantner Edge computing devices and GI.cloud at InteractiveWest

Our Edge computing devices and our new GI.cloud was presented by our partners Christian Lutz and Jodok Batlogg (founders of Crate.io).

Read more...
News

Measurements at -40°C ambient temperature

We just tested our Q.bloxx XL A104 TCK in the climate chamber at -40°C ambient temperature and it does a perfect job under these extreme conditions.

Read more...
Success Stories

Airbus Helicopters Chooses Gantner to Upgrade their Fatigue Test Cells

Airbus Helicopters (formerly Eurocopter Group) is a global helicopter manufacturing and support company. It is the largest in the industry in terms of revenues and turbine helicopter deliveries. With the growth and advancement of their product offer, Airbus Helicopters identified a need to upgrade their component test benches at their newly enhanced manufacturing location in Donauwörth, Germany.

Read more...
Success Stories

Turbomeca Chooses the Q.series

Turbomeca is a french manufacturer of com­pres­sors and turbines for the aviation industry, among its customers Eurocopter, Augusta und Sikorsky. For the test and measurement design of future test stands were the products from four manufacturers tested, and the companies rated on quality in production, and in all functional processes. Turbomeca selects Gantner Instruments GmbH as manufac­turer and accredited according to strict rules. Gantner Instruments is exclusively represented by BGP Electronic in France.

Read more...