Overview
The new trains in Singapore are part of Land Transport Authorithy`s efforts to enhance existing rail capacity for the coming years. Out of the 42 trains, 18 trains are aimed at the North East Line (NEL) of the network while the Circle Line (CCL) will receive the 24 trains. This will improve fleet capacity by 60-70% on both lines.
The Gantner Solution
Once train cars shipped to Singapore they carrry out testing before they put them in to operation.
Test Measurement and Control system from Gantner Instruments equipped with multi-channel analog input modules and Dynamic High Voltage input modules with high isolations for Train testing for the complete driverless metro system designed and constructed by Alstom which are operating on NEL (North East Line) and CCL (Circle Line) Railway lines. The Alstom Metropolis C830 are the second generation of communication-based train control (CBTC) rolling stock currently using in Mass Rapid Transit (MRT) lines to meet the growing demand of passengers in Singapore.
NEL (North East Line) project
1 x Q.brixx station
1 x Q.brixx A101
2 x Q.brixx A107
2 x Q.brixx A128
CCL (Circle Line) project
1 x Q.brixx station
1 x Q.brixx A107
1 x Q.brixx A128
Q.brixx station
The powerful Q.brixx station is a programable test controller with logger functions.
Q.brixx A101
The Q.brixx module A101 with two universal inputs was selected for vibration measurement to provide fast high accuracy digitalization.
Q.brixx A107
The high density Q.brixx module A107 was selected to provide precise, isolated, noise free strain gage measurements.
Q.brixx A128
The Q.brixx module A128 with 4 galvanically isolated input channels was selected for high voltage testing.
More information about our products can be found in the product finder:
More articles
SHMII 2025: Real-Time Structural Monitoring in Focus
Gantner Instruments is participating in the 13th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), scheduled to take place from September 1 to 5, 2025, in Graz, Austria.
Read more...6 Tips for Stress-free Strain Measurement during Fatigue Testing of Aircraft Structures
Strain is the single most important measurement during aircraft fatigue testing. The accuracy and precision of strain gauge measurements is of the greatest importance to exactly determine the durability and damage tolerance of a structure. The higher a structure is in the ‘pyramid of test’, the higher the test complexity, number of measurement channels, and data produced. On top of that the risk in terms of time delay and cost associated to a test program increases more than proportional with the increase in test complexity. Here are six tips to help you choose the right data acquisition system for your fatigue test:
Read more...The importance of modern data management
A new study by Gantner Instruments shows two opposing trends: aircraft structures are becoming increasingly complex, whilst development times need to be shortened. Test engineers are continuous being pressured to look for ways to reduce test time and risk.
Read more...Turn your TwinCAT automation system into a high-performance Data Acquisition System
Connectivity and flexible integration of our high-accuracy and high-speed I/O modules into any automation system is in our DNA. That is why we have made our high-performance Q.series X I/O modules available for easy and comfortable integration into TwinCAT, the EtherCAT master from Beckhoff.
Read more...