The universal measuring module Q.series A121 is designed for measurements of voltage, current, Pt100 sensors, NTC resistors, IEPE sensors as well as strain gauge half and quarter bridges. This means that in addition to the typical charging and discharging tests, the shock, vibration and stress tests can also be carried out successfully.
The module has 2 galvanically isolated inputs, which are isolated to each other, to the voltage supply and the interface with an isolation voltage of 1200 VDC. A measuring rate of 100 kHz per channel is very suitable for recording signals in case of shock test without signal losses.
The high-voltage modules of the Q.series can be combined with all Q.series modules and controllers. They are preferred by many system integrators and are already successfully used by many users.
For example, Daimler AG, Deutsche Accumotive, VOLVO Cars, Renault Battery Lab, General Motors Battery Lab, Schaeffler Group, ZF Friedrichshafen and Bosch Battery Solutions. But also testing institutes such as TUEV Sued relies on the products of Gantner Instruments.
More articles
SHMII 2025: Real-Time Structural Monitoring in Focus
Gantner Instruments is participating in the 13th International Conference on Structural Health Monitoring of Intelligent Infrastructure (SHMII), scheduled to take place from September 1 to 5, 2025, in Graz, Austria.
Read more...Webinar – Crate.io + Gantner Instruments: Real-time energy grid control based on big data
With the increase in renewable energy sources, the challenge for electric grid operators to keep grid frequencies stable has become even more significant. Constant data collection is essential for modern control technology and makes it possible to execute controls more quickly, whereby the use of smart grids can be further optimized.
Read more...Mesures Solutions Expo 2024
Being close to customers is the motto of the Mesures Solutions EXPO, which will be held on October 16 and 17 at the Cité des Congrès in Lyon.
Read more...Putting Intelligent Heat Pump Control to the Test Real World Performance Evaluation
Given the increasing share of renewable energies in the electric energy system, flexibilities are key to match production and demand. Domestic heat pumps are expected and promoted to further increase as a key technology. Research is ongoing to utilize these heat pump systems and their thermal storage as flexibilities within the electrical energy system’s superordinate level.
Read more...