Austria | Germany | France | Sweden | India | USA | China | Singapore
Huge Wind Turbine Blade Tests at BLAEST
News & Events | 1 minute Reading Time |

Huge Wind Turbine Blade Tests at BLAEST

The world’s longest rotor blade was manufactured by LM Wind Power in Denmark. Planning the test of the 290 ft (88.4 m) long rotor blade began in 2015. With BLAEST (the Blade Test Centre) Tests are now underway together in Aalborg, Denmark.

Testing of the world’s longest wind turbine blade

The LM 88.4 P test blade arrived at BLAEST on 1st July, 2016, after being transported from LM Wind Power’s Pilot Plant in Lunderskov. In four weeks the static test was successfully completed.

The LM 88.4 P demonstrated that it can withstand extremely high winds. In the next few months a fatigue test involving the shaking the blade up and down several million times was conducted to determine the durability, longevity, and the ability to survive 25 years of offshore operation.

For the rest of 2016, two LM 88.4 P blades will be tested simultaneously: one at LM Wind Power’s Lunderskov Test Centre, and one at the BLAEST test facility. The parallel testing program will provide results over a 7-month duration – to ensure that the blade meets its design requirements, in half the time normally required for testing.

The BLAEST test centre is co-owned by the leading wind technology institutes Force Technology, Technical University of Denmark (DTU – Risø) and Det Norske Veritas DNV Germanischer Lloyd. BLAEST operates several test stands for testing the strength and fatigue of wind turbine blades.

BLAEST Test Centre has been using Gantner Instruments strain gauge technology for several years. Several systems with up to 100 channels per measuring setup record the strain signals dynamically, synchronously and precisely. The modules Q.bloxx A116 and the test controller Q.station were used.

Testing is performed in cooperation with our Danish partner IPC Teknik ApS.

More articles

News & Events

Global Industrie 2023

Gantner Instruments will attend the fifth edition of the Global Industrie in Lyon, France, which will take place from the 7th to the 10th of March 2023 at Eurexpo Lyon! With 2,300 exhibitors and five different exhibition fields, the Global Industrie is one of the world’s leading industry exhibitions.

Read more...
News & Events

China Windpower 2023

China Wind Power(CWP) will be held 17-19 October, 2023. The total exhibition area will exceed 80,000 square meters, more than 750 China and overseas companies will appear in CWP. There included special exhibition areas, such as offshore wind power, hydrogen storage and energy storage. Innovation drivers from politics and business use this platform to exchange views on current topics and work together on solutions from the energy industry challenges of today and the future.

Read more...
News & Events

Force monitoring improves efficiency of Airbus’ Final Assembly Line

In November 2016 the Airbus A350-1000 flew for the very first time. The A350-1000 is part of the A350 XWB family and is Airbus’ largest and most powerful twin-engined airliner ever. Airbus began the assembly of the A350-1000 in September, 2015, less than a year after the first delivery of the A350-900. For maximum flexibility, the existing A350 XWB Final Assembly Line (FAL) can be used for both A350-900 and A350-1000 models.

Read more...
Products & Services

Voltage IEPE Sensor Measurement Data Acquisition (DAQ) with Q.bloxx A111

Q.bloxx is the ideal DAQ solution for widely distributed installations, electrical panels, and environmental enclosures. Q.bloxx measurement modules provide integrated signal conditioning and arithmetic functions, packaged in modular, DIN Rail mountable enclosures that easily snap together for quick system expansion.

Read more...