Stadium Monitoring
Monitoring of the EM-stadium ESTADIO MUNICIPAL DE BRAGA in Portugal.
The stadium was built into the rock of a hill. The left side of the construction is fixed to the rock and carries the right side by steel ropes.
Stadium Monitoring
Lots of different sensors are used:
- Barometric pressure above and below the roof to get conclusions of the lifting forces.
- 3-axial acceleration (250 Hz) of the roof.
- Forces in the ropes (50 MN).
- Incline of the stairways to the grandstand.
- Wind speed and direction.
Requirements:
- Decentralized setup (distances up to 650 m).
- Sample rate 250 samples/sec.
- More than 100 measuring points.
- Permanent long time use.
The use of the e.bloxx modules A1 for acceleration, A3 for voltages and A6 for bridges provides the required long term stability, measuring rate and accuracy. The distance from one to the other platform will be realized with an optical link. Via Ethernet the measurement results was transferred to the PC. Critical values are online controlled by limit function in the modules.
The system runs since the construction of the stadium is satisfactory.
You can find a detailed article on the subject of vibration measurement here.
For our Canadian client PINNACLE RENEWABLE ENERGY, we delivered the condition monitoring solution for the unloading process of industrial wood pellets. Fast-changing weather conditions and remoteness were among the top challenges of this project, but we could offer a solid solution.
Download the full case study here.
Do you have any questions? Please contact our measurement technology experts: