|
|
 |
 |
 |
 |
|
|
 |
| | e.bloxx A1
Universal module for all standard measurement and signal inputs | | | | |  | | e.bloxx A1-1 | | | | | | |
1, 4 or 8 universal input channels
Voltage, current, resistance, Pt100, Pt1000, thermocouples, meaurement bridges | | 1 digital input per channel
Status, reset | | 1 solid state relay output per channel
Status, alarm, threshold, tolerance band | | ADC-conversion and signal conditioning with 19 bit up to 1000/s
Linearization, digital filter, average, scaling, min/max memory, arithmetics | | RS 485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A2
Fast general purpose measuring module for ICP and strain gauge sensors | | | | |  | | e.bloxx A2-1 | | | | | | |
1 general purpose analog input channel
strain gauge, piezo resistive bridges, and ICP sensors, voltage, current | | 1 digital input and 1 digital output
Status, zero balance, memory reset, alarm, limit value, tolerance band | | Signal conditioning
Linearization, digital filtering, averaging, scaling, minimum/maximum store, true RMS value, arithmetic | | TEDS functionality
Reading of Transducer Electronic Data Sheet from a TEDS sensor module and setup of the A2 internals automatically (IEEE 1451.4 Class 2) | | RS 485 fieldbus interface
Modbus-RTU, ASCII, and Local Bus to Test Controller | | | | | | | |
| | e.bloxx A3
Multi channel module for voltage and current, attractive channel price | | | | |  | | e.bloxx A3-1 | | | | | | |
4 or 16 galvanic isolated voltage / current input channels
Differential voltage, current (with e.bloxx Terminal 4C), galvanically isolated 100VDC | | Sample rate 100/s with 4 active channels
Module sample rate 400/s | | 1 digital input and 1 digital output
Status, reset, alarm, threshold, tolerance band | | ADC-conversion and signal conditioning with 19 bit
Linearization, digital filter, average, scaling, min/max memory, arithmetics | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A4TC
Multi channel module for thermocouple and voltage, attractive channel price | | | | |  | | e.bloxx A4-1TC | | | | | | |
4 or 16 galvanic isolated Thermocouple input channels
Thermocouples, voltages +/- 80 mV | | Dynamic linearization
Optimized use of base points for type B, E, J, K, L, N, R, S, T, U, import of individual curves | | ADC-conversion and signal conditioning with 19 bit and up to 100/s
Linearization, digital filter, average, scaling, min/max memory, arithmetics | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A5
Precise module for Pt100/Pt1000 | | | | |  | | e.bloxx A5-1 | | | | | | |
RTD input module
Pt100/Pt1000, resistance in 2, 3 or 4 wire | | 1 digital input
Status, reset | | 1 digital output
Alarm, threshold, tolerance band | | ADC-conversion and signal conditioning with 19 bit
Linearization, digital filter, average, scaling, min/max memory, arithmetics | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A5CR
2-channel module for Cryo application | | | | | | | e.bloxx A5-1CR | | | | | | |
2 Input channels for Cryo sensors
e.g. Type Cernox or TVO | | Sensor excitation 8 µAeff only
to avoid self heading of the sensor | | Individual linearization of the sensor characteristics
Sensor specific linearization by using 64 nodes and archive in a sensor data file (import function). | | 1 digital input, 1 digital output
Status, alarm, limit value, tolerance band | | RS 485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A6-2CF
Carrier Frequency Bridge Module | | | | |  | | e.bloxx A6-2CF | | | | | | |
Universal carrier frequency sensor connection
Strain gauges full, half and quarter bridges, inductive bridges, LVDT | | 6 digital inputs and 4 digital outputs
Functions definable, e.g. memory delete, frequency measurement, counter, alarm, threshold, tolerance band, status | | 2 analog outputs
+/- 10 V, any variable attributable, e.g. netto and envelope curve | | ADC-conversion and signal conditioning with 19 bit and 5000/s
Linearization, digital filter 4th pole, scaling, tare, min/max memory, run/hold, envelope curve, arithmetics, alarm, threshold, tolerance band | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx A9
Analog output module | | | | |  | | e.bloxx A9-1 | | | | | | |
4 analog outputs
Voltage +/- 10V and current 4..20mA selectable | | 16 bit DAC
Conversion rate up to 1000/s | | 1 digital input and 1 digital output
Status, tara, reset, alarm, threshold, tolerance band | | Signal conditioning
Scaling, min/max memory, arithmetics | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx D1
Digital module | | | | |  | | e.bloxx D1-1 | | | | | | |
8 to 32 digital in/outputs
freely configurable | | Status in-/output
Process or host controlled | | Frequence in-/output
Chronos method for precise and fast frequence measurement up to 2 MHz, frequency and PWM output | | Counter input
Quadrature counter, Up/Down counter up to 400 kHz | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx D2
Relay module | | | | | | | e.bloxx D2-1 | | | | | | |
4 relay outputs
2 closing contacts and 2 switchable contacts | | Switching of electrical power
230 VAC / 3 A, 30 VDC / 3 A | | Many operations
Expected mechanical life-span: 50,000,000 cycles | | RS485 fieldbus interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
| | e.bloxx D3
Multipurpose CAN and serial interface module | | | | |  | | e.bloxx D3 | | | | | | |
e.bloxx D3-CAN - CAN input and output
CAN node 2.0A / 2.0B ref. to ISO 11898 | | e.bloxx D3-COM - RS-485 und RS-232 Master
For connecting of serial devices and fieldbus slaves,
standard protocol Modbus-RTU, others on request | | e.bloxx D3-SSI - RS-422 Master
For connection absolute encoders (e.g. angle, displacement)
with SSI (serial synchrony interface) | | 6 digital inputs and 4 digital outputs
Definition of functions like status, alarm or counter | | RS-485 fieldbus (slave) interface
Profibus-DP, Modbus-RTU, ASCII | | | | | | | |
|
 |
|
|
|
|
|
New Drive for Measurement and Test Automation
