|
|
 |
 |
 |
 |
|
|
 |
| EADS CCR, Paris/France | | | | | Reference project: | | Material testing | | | | | Summary: | | When testing new materials they have to be tested in a wide temperature range until they break. e.bloxx modules are measuring elongation, load, and deformation. | | | |
|
| Hilti Entwicklungszentrum, Kaufering/Germay | | | | | Reference project: | | Connection systems | | | | | Summary: | | To ensure the durability of a screw-dowel-combination HILTI AG does tests pulling out the screw. The load-displacement diagram is recorded with the e.bloxx and it indicates the quality of the connection. | | | |
|
| ZF, Friedrichshafen/Germany | | | | | Reference project: | | Gearbox | | | | | Summary: | | On a test stand the forces which are required to switch a car-gear box manually are being measured . The measured data indicate possible problems in the gear box. | | | |
|
| Behr, Stuttgart/Germany | | | | | Reference project: | | Cooling of an engine | | | | | Summary: | | When testing a cooling system for engines many temperatures have to be acquired in an time synchronized "array" to analyze the arrangement across the whole cooling surface. Additionally, cooling water temperature and pressure are being measured. | | | |
|
| BMW, Munich/Germany | | | | | Reference project: | | Testing of power trains | | | | | Summary: | | The dynamic testing of power trains has to be done under variing loads with a radial torque and an axial load. | | | |
|
| Volkswagen, Isenbüttel/Germany | | | | | Reference project: | | Fuel cell | | | | | Summary: | | Test stands for testing fuel cells with its relevant quantities temperature, voltage and current. | | | |
|
| RWTH - VKA, Aachen/Germany | | | | | Reference project: | | Response torque | | | | | Summary: | | Response torque measurements are done with combustion engines on engine test stands. Characteristics are linearized after measuring the curve. | | | |
|
| Germanischer Lloyd, Hamburg/Germany | | | | | Reference project: | | Strain measurement | | | | | Summary: | | Supervision of the bowing under load of container ships by strain gage measurements with the e.bloxx A6-2CF. | | | |
|
| ThyssenKrupp Automotive Systems, Essen/Germany | | | | | Reference project: | | Component and assembly group testing | | | | | Summary: | | The e.bloxx A6-2CF is being used with single and multi channel component test stands. single parts and even complete assembly groups in the automotive industry are being tested. In parallel the part's temperature is being measured with a thermocouple by an e.bloxx A1-1. With temperatures above +95°C the test stand is stopped automatically and it continues at +70°C. | | | |
|
|
 |
|
|
|
|
|
New Drive for Measurement and Test Automation
